Fisher Price Aquarium Swing Assembly Instructions Part Two

After reading part one of the Fisher Price Aquarium Swing assembly instructions, you are very close to having it set up, and moments away from watching your little one have the time of their lives in their new baby swing.



Once you are sure everything is good to go, prepare the seat of the swing. Hold the seat upright, put on the pad so that the ruffle part is on the top. Insert the crotch belt through the appropriate slot and fold the top of the pad down over the bottom of the seat. Insert the two elastic loops and flip over the seat. Hook each elastic loop onto the appropriate peg on the side of the swing seat. If they are properly placed, the loops should cross over one another. Flip the seat back around and insert the waist belts through the slits of the plastic pad. Check to make sure that the pad edges fit around the rim of the seat well. If you plan to use the tray, click it into place at this point by inserting the tray tabs into the slots on the sides of the seat.

Connect the completed seat into the seat tube arm piece. Press the button on the seat tube arm piece and place it into the seat tube. Just as you checked for the snapping noise earlier, check for it again once you place these two pieces together.

Secure the seat by fitting an M5 lock nut into the opening on the seat tube. This should look like a hexagon. The rounded side of the nut should be facing outward if it is appropriately placed. Once this is done, insert the M5 x 30 mm screw into the opposite side’s hole and tighten the screw with a screwdriver. Slide the seat tube into the motorized frame tube. Check to hear the click when you lock the seat tube into the motorized frame tube. Next, secure the motorized frame tube by fitting another M5 lock nut into the opening on the motorized frame tube that also looks like a hexagon. The rounded side of the lock nut should face outward. Finish this step by inserting another M5 x 30 screw into the hole of the opposite side of the motorized frame tube and tightening with a screwdriver.

Next comes the more fun part of putting together the swing, putting on the toys. The toys will entertain your little one for many days to come. Take the string of each individual toy and fit it through the slot on the mobile. Tug on each string lightly to make sure that it is secure. Install the batteries by opening the battery compartment door and inserting four brand new D batteries. Make sure you replace the battery compartment door. Once you have done this, you can place your baby in the swing and see how much fun your little one will have!

Now that you have set up your baby swing, and it is ready to be enjoyed by your little one, be sure to read about baby safety in your new Fisher Price baby swing.